Foren
Neue Beiträge
Foren durchsuchen
Modelle
Golf 4 R32
Golf 5 R32
Passat R36
Golf 6 R
Scirocco R
Golf 7 GTI / R
Anleitungen
Galerie
Neue Medien
Neue Kommentare
Medien suchen
Online
Anmelden
Registrieren
Aktuelles
Nur Titel durchsuchen
Von:
Suche
Suche
Nur Titel durchsuchen
Von:
Neue Beiträge
Foren durchsuchen
Anmelden
Registrieren
Menü
Anmelden
Registrieren
App installieren
Installieren
Golf 5 R32
R32 Probleme/Fehler/Defekte
DSG im Sack!
JavaScript ist deaktiviert. Für eine bessere Darstellung aktiviere bitte JavaScript in deinem Browser, bevor du fortfährst.
Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden.
Du solltest ein Upgrade durchführen oder einen
alternativen Browser
verwenden.
Auf Thema antworten
Beitrag
<blockquote data-quote="Tom.Schmeler" data-source="post: 472042" data-attributes="member: 5522"><p>Sehr wichtig, waerhrend der ganze Prozedur Auto an und auf der Bremse stehen, voll.</p><p>Das Getriebe wird Klonk Klonk machen und es tut weh im Herz, aber 8 von 10 Mal hilft es.</p><p> </p><p>Software version findest du in VCDS wenn du ins Modul 02 Transmission gehst. Es sind die letzten 4 der ID Nummer.</p><p>Hast du zum Beispiel 1310 hinten ist >0800</p><p> </p><p>Druecke die Daumen.</p><p> </p><p>Bitte: </p><p> </p><p><strong>Basic Setting </strong></p><p> </p><p><strong><u>Prerequisites:</u></strong></p><p></p><ul> <li data-xf-list-type="ul">Fluid Temperature 30...100 °C (86...210 °F), see Measuring Blocks, Group 019.</li> <li data-xf-list-type="ul">Selector Lever in P</li> <li data-xf-list-type="ul">Ignition ON</li> <li data-xf-list-type="ul">Engine ON (Idling) for one minute or more</li> <li data-xf-list-type="ul">Brake Pedal operated (hold for the whole procedure)</li> <li data-xf-list-type="ul">Throttle Pedal not operated</li> </ul><p><em><strong>NOTE:</strong> Be sure to perform the following steps in the sequence shown, followed by the defined test drive.</em> </p><p><strong>[Select]</strong></p><p><strong>[02 - Transmission]</strong></p><p><strong>[Basic Settings - 04]</strong></p><p> </p><p><strong>Transmission Tolerances (Engaged Calibration) </strong></p><p> </p><p>Group 061</p><p><strong>[Go!]</strong></p><p></p><ul> <li data-xf-list-type="ul">When you go to Basic Settings 061 and click GO the screen may look like this: <a href="http://img404.imageshack.us/img404/5604/061go.png" target="_blank">Basic Settings 061</a></li> <li data-xf-list-type="ul">Wait until the numbers quit moving and the trans will quit making noises. Basic Settings switches to <strong>On</strong> when finished: <a href="http://img38.imageshack.us/img38/5521/061done.png" target="_blank">Basic Settings 061</a></li> </ul><p>Wait until Basic Settings has switched to ON and all numbers have stopped moving. This may take one minute.</p><p> </p><p><strong>Transmission Tolerances (Synch. Point. Measurement) </strong></p><p> </p><p>Group 060</p><p><strong>[Go!]</strong></p><p></p><ul> <li data-xf-list-type="ul">When you go to Basic Settings 060 and click GO the screen may look like this: <a href="http://img227.imageshack.us/img227/5338/060go.png" target="_blank">Basic Settings 060</a></li> <li data-xf-list-type="ul">Wait until the numbers quit moving and the trans will quit making noises. Basic Settings switches to <strong>On</strong> when finished: <a href="http://img695.imageshack.us/img695/5637/060done.png" target="_blank">Basic Settings 060</a></li> </ul><p>Wait until Basic Settings has switched to ON and all numbers have stopped moving. </p><p><strong>Clutch Adaptation </strong></p><p> </p><p><em><strong>Control Module Software Version < 0800:</strong></em> </p><p>Group 062</p><p><strong>[Go!]</strong></p><p>Activate the Basic Setting.</p><p><strong>[ON/OFF/Next]</strong></p><p> </p><p><em><strong>Control Module Software Version >= 0800 :</strong></em> </p><p>Group 067</p><p><strong>[Go!]</strong></p><p>Activate the Basic Setting.</p><p><strong>[ON/OFF/Next]</strong></p><p> </p><p><strong>Reset Values (Clutch Safety Function) </strong></p><p> </p><p>Group 068</p><p><strong>[Go!]</strong></p><p>Activate the Basic Setting.</p><p><strong>[ON/OFF/Next]</strong></p><p> </p><p><strong>Reset Values (Pressure Adaptation) </strong></p><p> </p><p>Group 065</p><p><strong>[Go!]</strong></p><p>Activate the Basic Setting.</p><p><strong>[ON/OFF/Next]</strong></p><p> </p><p><strong>Reset Values (Steering Wheel Paddle Installation) </strong></p><p> </p><p>Group 063</p><p><strong>[Go!]</strong></p><p>Activate the Basic Setting.</p><p><strong>[ON/OFF/Next]</strong></p><p> </p><p><strong>Reset Values (ESP & Tip Cruise Control Installation) </strong></p><p> </p><p>Group 069</p><p><strong>[Go!]</strong></p><p>Activate the Basic Setting.</p><p><strong>[ON/OFF/Next]</strong></p><p> </p><p><strong>[Done, Go Back]</strong></p><p>Switch off Ignition, wait 10 Seconds and switch it back on.</p><p><strong>[Fault Codes - 02]</strong></p><p>Check and clear fault codes after successful test.</p><p><strong>[Close Controller, Go Back - 06]</strong></p><p>Perform the Defined Test Drive.</p><p> </p><p> </p><p> </p><p> </p><p><strong>Special Procedures </strong></p><p> </p><p><strong>Defined Test Drive </strong></p><p> </p><p><em>Suggested test drive after replacing the mechatronic or successful basic setting.</em></p><p> </p><p><strong><u>Prerequisites:</u></strong></p><p></p><ul> <li data-xf-list-type="ul">Fluid Temperature 30...100 °C (86...210 °F), see Measuring Blocks, Group 019.</li> <li data-xf-list-type="ul">Do Not use Cruise Control.</li> </ul><p>Drive in Tiptronic Mode from stand still up to 6th Gear.</p><p>While doing that make sure to drive in Gears 3 or 5 for approx. 5 minutes and also in 4 or 6 for approx. 5 minutes.</p><p>The engine speed window for all gears is 1200 - 3500 RPM (for clutch calibration).</p><p>Perform one sharp braking followed by a full throttle acceleration (oil return check) while in Drive, Not Tiptronic Mode.</p><p>Evaluate creep and starting-off points.</p><p>Check for leaks.</p><p> </p><p><em><strong>NOTE:</strong> If the test drive cannot be performed in the recommended way or the necessary time, any remaining adaptations will be performed automatically during normal driving.</em> </p><p> </p><p> </p><p><strong>Special Notes </strong></p><p></p><ul> <li data-xf-list-type="ul">Some modules do not require the use if the [ON/OFF/Next] button. If an Error is displayed after clicking the button, or the Basic Settings status does not switch to On, let the selected group and procedure finish on its own.</li> </ul> <ul> <li data-xf-list-type="ul">It is normal for the transmission to make noise while the tolerances are adapting. Do not exit or abort the Basic Settings sequence prematurely if you hear clacking noises.</li> </ul></blockquote><p></p>
[QUOTE="Tom.Schmeler, post: 472042, member: 5522"] Sehr wichtig, waerhrend der ganze Prozedur Auto an und auf der Bremse stehen, voll. Das Getriebe wird Klonk Klonk machen und es tut weh im Herz, aber 8 von 10 Mal hilft es. Software version findest du in VCDS wenn du ins Modul 02 Transmission gehst. Es sind die letzten 4 der ID Nummer. Hast du zum Beispiel 1310 hinten ist >0800 Druecke die Daumen. Bitte: [B]Basic Setting [/B] [B][U]Prerequisites:[/U][/B] [LIST] [*]Fluid Temperature 30...100 °C (86...210 °F), see Measuring Blocks, Group 019. [*]Selector Lever in P [*]Ignition ON [*]Engine ON (Idling) for one minute or more [*]Brake Pedal operated (hold for the whole procedure) [*]Throttle Pedal not operated [/LIST][I][B]NOTE:[/B] Be sure to perform the following steps in the sequence shown, followed by the defined test drive.[/I] [B][Select][/B] [B][02 - Transmission][/B] [B][Basic Settings - 04][/B] [B]Transmission Tolerances (Engaged Calibration) [/B] Group 061 [B][Go!][/B] [LIST] [*]When you go to Basic Settings 061 and click GO the screen may look like this: [URL="http://img404.imageshack.us/img404/5604/061go.png"]Basic Settings 061[/URL] [*]Wait until the numbers quit moving and the trans will quit making noises. Basic Settings switches to [B]On[/B] when finished: [URL="http://img38.imageshack.us/img38/5521/061done.png"]Basic Settings 061[/URL] [/LIST]Wait until Basic Settings has switched to ON and all numbers have stopped moving. This may take one minute. [B]Transmission Tolerances (Synch. Point. Measurement) [/B] Group 060 [B][Go!][/B] [LIST] [*]When you go to Basic Settings 060 and click GO the screen may look like this: [URL="http://img227.imageshack.us/img227/5338/060go.png"]Basic Settings 060[/URL] [*]Wait until the numbers quit moving and the trans will quit making noises. Basic Settings switches to [B]On[/B] when finished: [URL="http://img695.imageshack.us/img695/5637/060done.png"]Basic Settings 060[/URL] [/LIST]Wait until Basic Settings has switched to ON and all numbers have stopped moving. [B]Clutch Adaptation [/B] [I][B]Control Module Software Version < 0800:[/B][/I] Group 062 [B][Go!][/B] Activate the Basic Setting. [B][ON/OFF/Next][/B] [I][B]Control Module Software Version >= 0800 :[/B][/I] Group 067 [B][Go!][/B] Activate the Basic Setting. [B][ON/OFF/Next][/B] [B]Reset Values (Clutch Safety Function) [/B] Group 068 [B][Go!][/B] Activate the Basic Setting. [B][ON/OFF/Next][/B] [B]Reset Values (Pressure Adaptation) [/B] Group 065 [B][Go!][/B] Activate the Basic Setting. [B][ON/OFF/Next][/B] [B]Reset Values (Steering Wheel Paddle Installation) [/B] Group 063 [B][Go!][/B] Activate the Basic Setting. [B][ON/OFF/Next][/B] [B]Reset Values (ESP & Tip Cruise Control Installation) [/B] Group 069 [B][Go!][/B] Activate the Basic Setting. [B][ON/OFF/Next][/B] [B][Done, Go Back][/B] Switch off Ignition, wait 10 Seconds and switch it back on. [B][Fault Codes - 02][/B] Check and clear fault codes after successful test. [B][Close Controller, Go Back - 06][/B] Perform the Defined Test Drive. [B]Special Procedures [/B] [B]Defined Test Drive [/B] [I]Suggested test drive after replacing the mechatronic or successful basic setting.[/I] [B][U]Prerequisites:[/U][/B] [LIST] [*]Fluid Temperature 30...100 °C (86...210 °F), see Measuring Blocks, Group 019. [*]Do Not use Cruise Control. [/LIST]Drive in Tiptronic Mode from stand still up to 6th Gear. While doing that make sure to drive in Gears 3 or 5 for approx. 5 minutes and also in 4 or 6 for approx. 5 minutes. The engine speed window for all gears is 1200 - 3500 RPM (for clutch calibration). Perform one sharp braking followed by a full throttle acceleration (oil return check) while in Drive, Not Tiptronic Mode. Evaluate creep and starting-off points. Check for leaks. [I][B]NOTE:[/B] If the test drive cannot be performed in the recommended way or the necessary time, any remaining adaptations will be performed automatically during normal driving.[/I] [B]Special Notes [/B] [LIST] [*]Some modules do not require the use if the [ON/OFF/Next] button. If an Error is displayed after clicking the button, or the Basic Settings status does not switch to On, let the selected group and procedure finish on its own. [/LIST] [LIST] [*]It is normal for the transmission to make noise while the tolerances are adapting. Do not exit or abort the Basic Settings sequence prematurely if you hear clacking noises. [/LIST] [/QUOTE]
Zitate
Authentifizierung
Antworten
Golf 5 R32
R32 Probleme/Fehler/Defekte
DSG im Sack!
Oben
Unten