Eine Messung bitte

Diskutiere Eine Messung bitte im Fahrwerk/Bremsanlage/Abgasanlage Forum im Bereich Golf 4 R32; Hallo Leute. :) Gruß aus Australien!!! Bitte helfen Ich bin richtig Euro Fahrwerk Nachrüstung auf meinen Australischen R32 (wir haben...
  • Eine Messung bitte Beitrag #1
graeme86
Dabei seit
18.01.2005
Beiträge
136
Punkte Reaktionen
0
Hallo Leute. :)

Gruß aus Australien!!!

Bitte helfen

Ich bin richtig Euro Fahrwerk Nachrüstung auf meinen Australischen R32 (wir haben US-Suspension)

Ich brauche die Messung von Mitte Hinterradnabe bis Unterkante des hinteren Kotflügel

Bitte mit vollem Tank.

Ich brauche Messung zum Einrichten der Höhe hinten richtig.

Vielen Dank

Graeme

:)
 
  • Eine Messung bitte Beitrag #2
Tom.Schmeler
Tom.Schmeler
Dabei seit
13.05.2009
Beiträge
3.185
Punkte Reaktionen
92
Hi Graeme,

What do you want to adjust if you install the original EU Spec suspension?
Fix height, nothing to adjust !

Tom
 
  • Eine Messung bitte Beitrag #3
graeme86
Dabei seit
18.01.2005
Beiträge
136
Punkte Reaktionen
0
Hi Tom

You need to set the height of the hub without the springs/wheels installed to tighten the control arm bushes correctly without tension, so I am looking for a standard measurement.
 
Zuletzt bearbeitet:
  • Eine Messung bitte Beitrag #4
Tom.Schmeler
Tom.Schmeler
Dabei seit
13.05.2009
Beiträge
3.185
Punkte Reaktionen
92
ok I see... Dont have that measures though...
Still common sense should perfectly do it !
Do not believe that your dealer will do that upon measuring... ! ;)
 
  • Eine Messung bitte Beitrag #5
graeme86
Dabei seit
18.01.2005
Beiträge
136
Punkte Reaktionen
0
Like you say, maybe they can be tigtened back on the ground or up on a ramp, but very difficult to get to outer bolts this way..

The workshop manual describes the procedure as measuring the height beforehand and tightening without the wheels on etc, but we of course do not have this distance with our higher suspension.
 
  • Eine Messung bitte Beitrag #6
Tom.Schmeler
Tom.Schmeler
Dabei seit
13.05.2009
Beiträge
3.185
Punkte Reaktionen
92
37cm should be ok !
 
  • Eine Messung bitte Beitrag #7
graeme86
Dabei seit
18.01.2005
Beiträge
136
Punkte Reaktionen
0
I have 37cm written down here from when I took off my US suspension (which is considerably higher than the Euro).

2 cm lower was quoted in original sales brochure, but I don't know if US suspension was raised as well from standard 4-motion.
 
  • Eine Messung bitte Beitrag #8
Tom.Schmeler
Tom.Schmeler
Dabei seit
13.05.2009
Beiträge
3.185
Punkte Reaktionen
92
what I have is 39 for a normal mk4 so +/- -2cm for the R lets me assume it should be around 37... hmmm maybe the documentation is wrong.

if I look at pictures of US spec R's they do not seem higher than EU spec...

Original measures US SPEC

Height 56.1 in 1,424 mm​
Ground Clearance 4.2 in 107 mm

source : http://www.r32argent.ca/R32%20information_files/r32%20tech%20specs.pdf
 
Zuletzt bearbeitet:
  • Eine Messung bitte Beitrag #9
graeme86
Dabei seit
18.01.2005
Beiträge
136
Punkte Reaktionen
0
2105_008.sized.jpg


As you can see ours are visibly higher than Euro!

I have a UK sales brochure that says "20mm lower than standard Golf" , but I also have an Austrian sales brochure (Prospekt) that says "drei Zentimeter tiefere Sportfahrwerk"!

Hence my confusion.
 
  • Eine Messung bitte Beitrag #10
loveR
loveR
Dabei seit
22.07.2007
Beiträge
3.207
Punkte Reaktionen
105
Nice *lol*

Looks like a Golf .:R32 Country *lol*:D
 
  • Eine Messung bitte Beitrag #11
graeme86
Dabei seit
18.01.2005
Beiträge
136
Punkte Reaktionen
0
Danke :D :D
 
Thema:

Eine Messung bitte

Ähnliche Themen
OS-T-32
Antworten
34
Aufrufe
3.933
OS-T-32
OS-T-32
Antworten
17
Aufrufe
3.971
coolhard
coolhard
Tobi R32 WRC
  • Artikel
Antworten
0
Aufrufe
2.636
Tobi R32 WRC
Tobi R32 WRC
Antworten
1
Aufrufe
1.161
Gast11191
Tobi R32 WRC
Antworten
1
Aufrufe
2.801
Tobi R32 WRC
Tobi R32 WRC
Oben Unten